| Customization: | Available |
|---|---|
| Application: | Metal |
| Process Usage: | Metal-Cutting CNC Machine Tools |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, base, slide, table, column, spindle box and other main parts of the use of high-strength cast iron; base for the box structure, compact and reasonable symmetrical structure to ensure that the basic pieces of high rigidity and bending Performance; A-type bridge cross-column and the internal grid-like tendons, effectively ensure the Z-axis strong cutting rigidity and accuracy; basic pieces of resin sand molding and aging treatment for the long-term use of machine tools to provide a guarantee of stability The
2, X, Y, Z guide rail are heavy 45 # / 55 # linear rolling guide, with fast, high rigidity, low friction, low noise, low temperature rise and other characteristics, with automatic forced lubrication, improve machine life ;
3, Z to plus weight balance to ensure that the spindle box movement smooth and stable; Z drive motor with loss of braking device;
4, X, Y, Z three directions with high precision and high strength of the inner loop double nut preload large lead ball screw, feed speed; drive motor through the flexible coupling and screw directly connected, into To the servo motor directly to the power transmission to the high precision ball screw, no backlash, to ensure the positioning accuracy and synchronization of the machine;
5, the use of Taiwan's high-speed, high precision, high rigidity spindle unit, axial and radial bearing capacity, the maximum speed of up to 8000rpm;
6, the spindle with the center of the inflatable structure, the spindle quickly when the knife with the center of the high pressure gas on the spindle cone to clean, to ensure the accuracy of tool clamping and life;
7, X, Y, Z three guide rails, screw are used protective devices to ensure that the screw and rail cleaning to ensure that the machine drive and movement accuracy and life;
8, the machine outside the protection of the use of full protection structure design, easy operation, safe and reliable;
9, the use of reliable centralized automatic lubrication device, timing, quantitative lubrication of the machine automatically point intermittent lubrication, according to the working conditions to adjust the lubrication time;
10, the use of Taiwan's professional manufacturers of 16 hats-type knife library, tool change accuracy, time is short, high efficiency, millions of times running test, meet the reliability requirements; with damping structure, can reduce the impact of exercise, The life of the magazine; pneumatic drive, easy to use, the shortest path tool change;
11, the use of oil and water separation device, can be collected to the majority of lubricants separated from the coolant to prevent the rapid deterioration of coolant, environmentally friendly;
12, the machine operating system using ergonomic principles, the operating box independent design, can rotate their own, easy to operate.
| ITEM | VMC500 | VMC530 | VMC650 |
| X-Axis travel | 500mm | 500mm | 650mm |
| Y-Axis travel | 350mm | 320mm | 500mm |
| Z-Axis travel | 400mm | 375mm | 500mm |
| Distance from Spindle nose to worktable surface | 100-500mm | 25-425mm | 150-650mm |
| Distance from spindle center to surface of column ram | 360mm | 345mm | 550mm |
| T slot (width×num.) | 14mm×3 | 16mm×3 | 18mm×3 |
| Worktable size | 600×300mm | 600×300mm | 450×900mm |
| Max.loading of worktable | 200Kg | 120Kg | 600Kg |
| Power of spindle motor | 3.7/5.5KW | 2.2/3.7KW | 5.5/7.5KW |
| Spindle speed | 6000-1000rpm | 6000/(or 8000/12000)rpm | 6000-8000rpm |
| Spindle taper | BT30 | BT30 | BT40 |
| Spindle bearing | P4 | P4 | P4 |
| Rapid traverse speed of 3 axes | X /Y 18m/min | X /Y 15m/min | X /Y 18m/min |
| Z 15m/min | Z 15m/min | Z 15m/min | |
| Cutting feed rate | 1-5000mm/min | 0-4000mm/min | 1-5000mm/min |
| Min.set unit & moving unit | 0.001mm | 0.001mm | 0.001mm |
| Pitch of X/Y axes | 6mm | 6mm | 6mm |
| Pitch of Z axis | 6mm | 6mm | 6mm |
| Positioning accuracy (300mm) | ±0.003 | ±0.008 | ±0.005 |
| Repeatability accuracy (300mm) | ±0.002 | ±0.005 | ±0.003 |
| Changing way of tools | Spindle | Cloak'type | Spindle floating/manipulator |
| Tool magazine | 12 | 12 | 20/24 |
| Tool spec. max.dia. (neighboring Tool)×weight×length | φ69mm×2.3Kg×360 | φ60mm×3.5Kg×175 | φ80mm×7Kg×300 |
| Tool changing time | 6S | 6S | 7/3.5S |
| Machine weight | 2500kg | 1800kg | 5500kg |
| Air pressure | 0.6MPa | 0.6MPa | 0.6MPa |
| Power of cooling pump for cutting | 370W | 370W | 370W |
| Overall size | 2000×1750×2100mm | 1700×1764×1708mm | 2805×2300×2600mm |
| Control system | HCNC 21M,MITSUBISHI FANUC SYSTEM | GSK system(or Taiwan Syntec system) | Mitsubishi system |
| ITEM | VMC-1060 | VMC-1360 | VMC-1370 | VMC-1580 |
| X axis travel(left and right of worktable) | 1000mm | 1300mm | 1300mm | 1500mm |
| Y axis travel(Forth and back of worktable) | 600mm | 600mm | 600mm | 800mm |
| Z axis travel(Above and below of spindle) | 600mm | 600mm | 650mm | 700mm |
| Distance from spindle nose to worktable | 180mm~780mm | 180mm~780mm | 150mm~800mm | 170mm~870mm |
| Distance from spindle center to column | 600mm | 600mm | 785mm | 800mm |
| T slot(width×No.) | 18×5 | 18×5 | 18×5 | 18×5 |
| Worktable size(L×W) | 600×1300mm | 600×1500mm | 710×1400mm | 800×1700mm |
| Max. load on worktable | 800kg | 800kg | 1000kg | 1500kg |
| Motor power | 7.5/11kw | 11/15kw | 15/18kw | 15/18kw |
| Spindle speed | 60~8000rpm | 60~8000rpm | 60~6000rpm | 60~6000rpm |
| Spindle taper | BT40 | BT40(BT50) | BT50 | BT50 |
| Spindle axis | P4 | P4 | P4 | P4 |
| 3 axis fast moving speed | 19m/min (X&Y) | 20m/min (X&Y) | 21m/min (X&Y) | 22m/min (X&Y) |
| 16m/min (Z ) | 17m/min (Z ) | 18m/min (Z ) | 19m/min (Z ) | |
| Cutting feeding rate | 1~5000mm | 1~5000mm | 1~5000mm | 1~5000mm |
| X/Y axis ball screw(diameter×space) | 40mm×10mm | 40mm×10mm | 50mm×10mm | 63mm×10mm |
| Z axis ball screw(diameter×space) | 40mm×10mm | 40mm×10mm | 50mm×10mm | 50mm×10mm |
| Min. set and moving unit | 0.001mm | 0.001mm | 0.001mm | 0.001mm |
| Tools changing style | spindle floating/manipulator | spindle floating/manipulator | spindle floating/manipulator | spindle floating/manipulator |
| Time of tools automatic changing(near) | 7/3.5s | 7/3.5s | 7/3.5s | 7/3.5s |
| ATC capacity | 20/24pcs | 20/24pcs | 20/24pcs | 20/24 |
Standard : Optional :
* Siemens 808D controller * FANUC, SIEMENS828D, GSK , KND
* BT40 Armless type ATC with 16 tools * Arm type ATC
* Taiwan spindle, screw and locking nut, linear, cylinder . * 4th axis
* Japan NSK bearing * Automatic chip convey
* Germany R+W coupling
* Automatic lubrication system
* Cool-heat exchanger
* Tri-color alarm lamp
* Full splash guard
* spindle taper hole cleaning system
* cooling system
The main performance characteristics:
Before payment
1. Free contact for the most suitable CNC milling machine.
2. Free professional design for each customer especially.
After sale service
1. 24 hours technical support by phone, email, skype ,whatapp or wechat.
2. 1years warranty period
3. Our senior engineer is available to travel aboard, help the installation, maintenance the CNC tapping drilling and milling machine and training staff.
4. By offering this support, we make sure the customer start the business smoothly, to realize win-win cooperation.
Payment
30% deposit ,70% spare payment before the milling machine shipment.
){kind=link}